MFC810 series 1140V inverter
The MFC810M series inverter is designed for high-end three-phase induction motors with a power class of 1140V. The introduction of three-level control technology, modular design and the use of water cooling system greatly reduce the volume of the inverter itself, so that this series of inverters can better meet the installation requirements of customers in a relatively small space.
Product features:
Input: 3×1140V, 45-66Hz; .
Output: 3×0… 1140V, 0-400Hz.
Two-way power flow (electric and regenerative modes)
Control mode: U/f scalar mode (linear, functional), vector mode (with sensor, without sensor).
Operation panel (detachable, multi-language LCD support).
Built-in PID controller.
Built-in winding controller and special controller for fan pump.
Built-in RS232/ RS485 communication module (supports MODBUS RTU communication protocol).
Programmable multi-speed control.
Point potentiometer function.
Built-in encoder interface.
Resonance frequency avoidance function.
Definable velocity curve (linear, S curve).
Direct torque control – space vector regulation.
Motor parameter identification.
Can store 4 groups of motor parameters
Application:
Mining machinery, rail transit.
| product model |
Constant torque load |
Pump and fan loads |
Overload every 10 minutes 60 seconds of current (A) |
boundary dimension | ||
| rated power(kW) | rated output current(A) | rated power(kW) | rated output current(A) | |||
| MFC810M/250kW | 250 | 180 | 315 | 220 | 270 | 750×420×380 |
| MFC810M/315kW | 315 | 220 | 400 | 275 | 330 | 750×420×380 |
| MFC810M/400kW | 400 | 275 | 500 | 340 | 410 | 1025×460×550 |
| MFC810M/500kW | 500 | 340 | 630 | 430 | 500 | 1025×460×560 |
| MFC810M/630kW | 630 | 430 | 800 | 530 | 640 | 1025×460×560 |