ESP Drive Cabinets: Features & Performance

CASE STUDY · 1 / 4

1 Project Background and Challenges

Challenging well conditions: ESPs typically operate at depths of 1,000 to 2,000 m. Sand and gas in the well place demanding requirements on pump startup and operating stability.

High energy costs: Conventional fixed-frequency operation consumes more energy, has a low power factor, and results in high electricity costs.

Limited control: Pump speed cannot be adjusted in real time as downhole pressure or flow changes. This reduces recovery efficiency and can damage the pump assembly.

Costly maintenance: Limited warning of downhole faults makes failures expensive, as the pump must be pulled for inspection and servicing.

2 Equipment Features

Flexible startup modes

Four startup modes are available for ESPs that are difficult to start in sandy or heavy-oil wells: torque boost, synchronous start, impact start, and rocking start. Operators can select the mode that suits the well conditions.

Multiple frequency reference modes

In addition to manual frequency setting, the drive can adjust frequency based on motor current or pump intake pressure, or use a gas-lock clearing mode. Current-based control helps prevent repeated gas-lock shutdowns in gassy wells. Closed-loop intake pressure control maintains a constant dynamic fluid level. If gas lock occurs, operators can switch to gas-lock clearing mode to attempt to restore operation.

Energy optimization

The drive automatically optimizes its output voltage to minimize ESP operating current. This saves energy, reduces heating in the downhole motor and cable, and extends equipment life.

ESP protection functions

In addition to standard protections, the drive monitors underload, output phase current imbalance, input phase loss, downhole sensor parameters, and external faults.

Modular design

The drive uses a modular internal layout and a draw-out main circuit for easier field servicing.

Outdoor operation in extreme temperatures

The outdoor drives are designed for continuous operation at ambient temperatures from −40 to +60 °C. Film capacitors in the main circuit last longer than conventional electrolytic capacitors and can operate at temperatures down to −40 °C. A dedicated cooling duct and high-capacity axial fans support operation at +60 °C. An internal condenser helps prevent moisture buildup from temperature changes, which could otherwise reduce insulation performance.

Touchscreen interface

A 10-inch resistive LCD touchscreen provides a clear operating display. Operators can switch between Chinese and English without stopping the equipment.

Integration and expansion

A downhole sensor control board and remote data transmission unit can be installed inside the cabinet and configured from the drive touchscreen. An optional UPS can power the downhole sensors for 48 hours during an external outage so operators can continue collecting downhole data.

3 Operating Results

Energy savings: Compared with fixed-frequency operation, reported average electricity savings ranged from 15% to 25%.

Production and uptime: Soft starting and speed control reduced equipment failures and extended the interval between pump inspections by more than 30%. More precise control improved crude oil recovery.

Remote monitoring: Remote monitoring and early warnings reduced manual inspections and maintenance costs.

Contact us

+1 (416) 821-9173

Fozuling 3rd Road, Jiangxia District, Wuhan, Hubei, China

Visiting Guidelines

FAQ

For inquiries, you can contact us through the link below!

Feedback